Lenze E94AZCDM100 - Manual (Page 27)

Technical data
General data and operating conditions
4
l
27 EDK94AZCDM DE/EN/FR/ES/IT 1.0
4 Technical data
4.1 General data and operating conditions
Conformity and approvals
Conformity
l CE 2006/95/EG Low−Voltage Directive
2004/108/EG EMC Directive
Approval
l UR UL508C: Industrial Control Equipment
Lenze File No. 132659
Protection of persons and devices
Type of protection EN 60529 IP 20
Insulation resistance EN 61800−5−1
l < 2000 m amsl: Overvoltage category III
l > 2000 m amsl: Overvoltage category II
Insulation of control circuits EN 61800−5−1
Safe mains isolation through double/reinforced insulation
EMC
Noise immunity
(according to requirements EN
61800−3) The controllers are designed for use in an industrial
environment. Operation on public networks requires
measures to be taken for limiting the expected emission of
radio interferences.
l Electrostatic discharge (ESD) EN 61000−4−2 8 kV for air discharge,
4 kV for contact discharge to
housing
l Radio frequency
– cable−guided EN 61000−4−6 150 kHz ... 80 MHz, 10 V/m
80% AM (1kHz)
– Interference (housing) EN 61000−4−3 80 MHz ... 1000 MHz, 10 V/m
80% AM (1kHz)
l Burst
– Power connections and
interfaces
EN 61000−4−4 2 kV/5 kHz
– Signal interfaces EN 61000−4−4 1 kV/5 kHz
– Control connections EN 61000−4−4 2 kV/5 kHz
l Surge (surge voltage)
– Power terminals EN 61000−4−5 1.2/50 ms,
1 kV phase/phase,
2 kV phase/PE
Noise emission, cable−guided Observe the information of the hardware manual of the
Servo Drive 9400 (EDS94SPP101) version.
C2 acc. to EN 61800−3