Lenze E94AYCEO - Manual (Page 46)

8 Diagnostics
LED status displays
EDK94AYCEO DE/EN/FR/ES/IT 1.0
46
l
H1_Diagnose−RJ45−Statusanzeigen_E94AYCEO
Description Colour / status LED
Red Green
LED
MS Blinking Off
250 ms
250 ms
CIP module status: "Standby"
The communication module is not fully configured yet, or the
configuration is incorrect.
Blinking Blinking
250 ms
250 ms
CIP module status: "Device Self Testing"
The communication module is performing a self test.
NS Off Off CIP network status: "No IP Adress"
The communication module is not supplied with voltage or has not
received an IP address yet.
Off On
CIP network status: "Duplicate IP"
The communication module cannot access the fieldbus (IP address
conflict).
Off Blinking
250 ms
250 ms
CIP network status: "Connection Timeout"
A time−out is executed.
On Off
CIP network status: "Connected"
The communication module is working correctly and has
established a connection to the scanner.
Blinking Off
250 ms
250 ms
CIP network status: "No Connections"
The communication module ...
l is working correctly;
l has been assigned an IP address;
l has not been integrated into the network by the scanner yet.
Blinking Blinking
250 ms
250 ms
CIP network status: "Self−Test"
The communication module is performing a self test.