Lenze GKK - Manual (Page 16)

Mechanical installation
Preparation
Gearboxes with breathers
4

16 BA 12.0032-EN 2.0
4.3.3 Gearboxes with breathers
Ventilating measures are intended as standard for gearboxes of type GKK. Depending
upon the mounting position, the ventilation may be restricted or even excluded.
Gearboxes supplied with a breather element bear a corresponding label on the gearbox.
Vor Inbetriebnahme die Transportsicherung
des Entlüftungsventils entfernen!
Before commissioning remove the shipping
brace of the ventilating valve!
ACHTUNG!!!
CAUTION!!!
Id
.-N
r.
100
202
45
Fig. 1 Label on the gearbox
4.3.4 Breather position, oil filling screw and drain plug
GKK
   

   

A B
   

as from GKK 05
   
C D
 oil filling screw or breather, if permissible)
 Drain plug