Lenze E82ZAFAC010 - Manual (Page 32)

4 Electrical installation
Wiring
EDK82ZAFAC−010 DE/EN/FR 5.0
32
l
H1_E_INST−steckerleiste
Wiring
Terminal data
Plug connector with spring connection
Possible connections rigid: 1.5 mm 2 (AWG 16)
flexible:
without wire end ferrule
1.5 mm
2 (AWG 16)
with wire end ferrule, without plastic sleeve
1.5 mm
2 (AWG 16)
with wire end ferrule, with plastic sleeve
0.5 mm
2 (AWG 20)
Bare end 9 mm
Use of plug connectors
(
Stop!
Observe the following to prevent any damage to plug connectors and
contacts:
ƒ Only plug in/unplug if the controller is disconnected from the mains!
ƒ First wire the plug connectors, then connect them!
ƒ Also connect unassigned plug connectors.
Use of plug connector with spring connection
E82ZAFX013