Lenze E82ZAFAC010 - Manual (Page 36)

5 Commissioning
Before switching on
EDK82ZAFAC−010 DE/EN/FR 5.0
36
l
H1inbet−Jmpausgg
5 Commissioning
Before switching on
)
Note!
ƒ If your configuration differs from the Lenze settings, please read the
instructions given under "Individual settings".
^ 39
ƒ Please observe
– that the jumpers can only be plugged when the device is switched off.
– that the jumpers at the function module are set correctly.
^ 37
– that C0034 matches the jumper setting ^ 37
Example: Bipolar setpoint selection (−10 ... +10 V) via X3.1/1U
ð
C0034/1 = 1, jumper in position "7 − 9"