5 mechanical installation, Mounting steps, Mechanical installation – Lenze ERBM100R035W User Manual
Page 36: 5mechanical installation
Advertising
![background image](/manuals/565991/36/background.png)
5
Mechanical installation
Mounting steps
EDKRBM002 DE/EN/FR 4.0
36
l
H1_MechINS−mInstall
5
Mechanical installation
Mounting steps
How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the
operating conditions mentioned in the technical data; if
required, additional measures must be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must
ensure the permanent mechanical connection.
Advertising
This manual is related to the following products: