Lenze EVS9332xK - Manual (Page 194)

Function library
Function blocks
3.2.49 Extrapolation (EXTPOL1)
3−166
l
EDSVS9332K−EXT EN 4.0
Settings
Note!
FB EXTPOL1 does not require setting. It must however be ensured, that numerator (C0950) and
denominator (C0951) are 1 in the function block CONV3 of the master.
Status signal
l EXTPOL1−STAT = HIGH
– Function block extrapolates
l EXTPOL1−STAT = LOW
– Input data is accepted directly.