Lenze MCH Series Drives Siemens P1 - Manual (Page 2)

This documentation applies to the use of an MCH Series Variable Frequency Drive in a Siemens P1 Floor Level
Network (FLN) and should be used in conjunction with the MCH Series Installation and Operation Manual (Document
MH01) that shipped with the drive. These documents should be read in their entirety as they contain important
technical data and describe the installation and operation of the drive.
Siemens P1, System 600 and Apogee are trademarks of Siemens AG, Munich, Germany; http://w1.siemens.com.
In the United States: http://www.usa.siemens.com
© 2003 AC Technology Corporation
No part of this documentation may be copied or made available to third parties without the explicit written approval
of AC Technology Corporation. All information given in this documentation has been carefully selected and tested
for compliance with the hardware and software described. Nevertheless, discrepancies cannot be ruled out. AC
Tech does not accept any responsibility nor liability for damages that may occur. Any necessary corrections will be
implemented in subsequent editions.
About These Instructions