Mounting steps – Lenze ERBSxxxxxxxx User Manual
Page 49
Advertising
Mechanical installation
Mounting steps
EDKRBS047R DE/EN/FR/ES/IT 8.0
49
l
H1_MechINS−mInstall
Free spaces for mounting variant
ERBS105
x
Wiring clearance
y
Cable bending radius
All dimensions in millimetres
Mounting steps
How to mount the brake resistor:
1. Select a suitable mounting location.
– The mounting location must always ensure the operating conditions mentioned in
the technical data; if required, additional measures must be taken.
– Ensure unimpeded air circulation for heat dissipation.
2. Screw down the brake resistor at the mounting location.
– The mounting location and the mounting material must ensure the permanent
mechanical connection.
Advertising