Lenze EPM-H520 - Manual (Page 68)

Installation
L
68 EDBEPM-H520 DE/EN/FR 4.0
Take off the housing cover
0
1
2
3
4
5
+24 VDC
N.C.
0 VDC
CAN+
N.C.
Shield
CAN-
V-
1
2
3
4
INPUT VOLTAGE:
18 - 32 VDC 15 W
fuse 1.25 A
MSP
LPT
back-up expansion
h520_009
Fig. 3-3 Take off the housing cover
1. Loosen bolts & and remove housing cover
Flash module 8 MB (back-up) mounting
LPT
A
C
B
h520_012
Fig. 3-4 Flash module 8 MB (back-up) mounting
1. Insert the distance pins ' into the bores of the main board and press until they click into place
2. Carefully insert the flash module & into the female plug strip ) and slightly press to fix them
3. Align the bores of the flash module & and the distance pins '
4. Press the flash module & onto the distance pins ' until they click into place
Show/Hide Bookmarks