Lenze E93ZWLX - Manual (Page 41)

Installation of the E93ZWL2 air lock
Preparations at the mounting plate
13
l
E93ZWLX DE/EN/FR 1.0
4.2 Preparations at the mounting plate
4.2.1 Drill bore holes
Note!
You can use a template for easy marking of the bore holes and the recess at the top
of the control cabinet. This template can be found in the Internet as dxf-file under
”Download” at
http:/ / www.Lenze.de
a
a1 a1
a1 a4 a1
a3 a3
a2 a2
a2 a2
d
b
b1
0
1
93ZWL002
 Top of control cabinet
 Mounting plate
a [mm] a1 [mm] a2 [mm] a3 [mm] a4 [mm] b [mm] b1 [mm] d [mm]
550 450 340 225 200 1005 70 9 (24x)
Working clearance a4 Minimum clearance
Left/right to another controller with air lock 200 mm
Left/right to another controller without air lock 30 mm
z Mark the bore holes on the mounting plate according to the figure.
z Drill the holes into the mounting plate.
Show/Hide Bookmarks