Lenze PLC Designer R3-x - Manual (Page 37)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
37
Working with the sample projects
Sample project with the "Actuator speed" application - Actuator Speed
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
7.1.6.5 Parameter
The Parameter button selects the visualisation of the parameter FBs.
• The mode selected last remains active.
• You can use the FBs to...
• read individual parameters
• write individual parameters
• Area  shows the FB for reading parameters.
For more information on the FB, please see the following section:
 L_DCO_ReadDriveParameter ( 105)
• Area  shows the FB for writing a parameter table.
Further information on the FB can be found in the following section:
 L_DCO_WriteDriveParameter ( 110)
 Read parameters  Write parameters