Lenze PLC Designer R3-x - Manual (Page 41)

Lenze · Commissioning of Lenze drives · 1.3 EN - 06/2014
41
Working with the sample projects
Sample project with "Table positioning" application - TablePositioning
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4. Update the project by clicking :
• Select the option Rebuild all
• Click the Build button to update the project.
5. Going online
• After a connection to the controller has been established successfully, the following status is
displayed in the Status line:
6. Download parameter set
• This command has the effect that the application and the parameter settings of the
»Engineer« project overwrite the parameter settings in the controller.
7. Optional: Adapt desired communication settings (for instance network address, baud rate).
8. Store parameter set
9. Mains switching to accept the communication settings to the device.