Lenze 8400 motec - Manual (Page 129)

Lenze · 8400 motec · Reference manual · DMS 4.1 EN · 08/2013 · TD05 129
5 Motor control (MCTRL)
5.9 Sensorless control for synchronous motors (SLPSM)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5.9.1 Parameterisation dialog/signal flow

Proceed as follows to open the dialog for parameterising the motor control:
1. »Engineer« Go to the Project view and select the 8400 motec controller.
2. Select the Application parameters tab from the Workspace.
3. Select the motor control "3: SLPSM: Sensorless PSM" from the Overview dialog level in the
Motor control list field:
4. Click the Motor control sensorless PSM button to change to the Overview  Motor control
sensorless PSM dialog box.
• This dialog level only shows a simplified signal flow with the most important
parameters.
• When you click the >>More details button in the left-most position, a signal flow with
more details/parameters is displayed.