Loadstar Sensors DQ-4000 - Manual (Page 3)

DQ-4000 DQ-4000 User's Guide
Page: 3 / 21
P/N : 033-02061 Rev. 1
Sensors reserves the right to make changes to its products at any time in the future. The specifications
mentioned in this document are provided as guidelines only and may change in the future to reflect
changes in design and availability of better test data. Copyright © Loadstar Sensors, Inc. 2005-2009.
Repair Pricing Policy
A nonrefundable analysis charge of $150.00 will be made on each out-of-warranty product returned to
Loadstar Sensors for repair. Loadstar Sensors will provide a repair quotation based upon the analysis.
The $150.00 will be applied towards the repair cost of the instrument/transducer. If repair is not required,
the instrument/transducer will be returned. The maximum repair price will be billed at seventy percent
(70%) of the current catalog price. For all communication about Repair, Order Status or pricing, please
contact Loadstar Sensors Customer Service at (510)623-9600.
SAFETY INFORMATION
General
Do not use this product in any manner not specified by the manufacturer. The protective features of this
product may be impaired if it is used in a manner not specified in the operating instructions.
Do not install substitute parts or perform any unauthorized modification to the product. Return the
product to a Loadstar Sensors office for any required service and repair to ensure that safety features are
maintained.
Instrument Grounding
If your product is provided with a grounding type power plug, the instrument chassis and cover must be
connected to an electrical ground to minimize shock hazard. The ground pin must be firmly connected to
an electrical ground (safety ground) terminal at the power outlet. Any interruption of the protective
(grounding) conductor or disconnection of the protective earth terminal will cause a potential shock
hazard that could result in personal injury.
Cleaning
Clean the outside of the instrument with a soft lint-free, slightly dampened cloth. Do not use detergent or
chemical solvents. Doing so may void your warranty.