Loadstar Sensors DQ-4000 - Manual (Page 7)

DQ-4000 DQ-4000 User's Guide
Page: 7 / 21
P/N : 033-02061 Rev. 1
ROHS in China
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006. Requirements for
Concentration Limits for Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products
SJ/T11364-2006, means that the product or part does not contain any of the following substances in
excess of the following maximum concentration values in any homogenous material: (a) 0.1% (by weight)
for cadmium. Unless otherwise stated by Loadstar Sensors in writing, this information represents
Loadstar Sensors best knowledge and belief based upon information provided by third party suppliers to
Loadstar Sensors.
In the event any product is proven not to conform with Loadstar Sensors Regulatory Information, as
provided herein, then Loadstar Sensors entire liability and Buyer’s exclusive remedy will be in accordance
with Loadstar’s Warranty Policy.
China RoHS is a two-step process that identifies concentration limits of certain hazardous substances in
electronic information products that are sold into China. Per the deadline set by the Chinese government,
March 1, 2007, Loadstar Sensors has implemented step one of China RoHS, self declaration of
hazardous materials and marking of the product. Loadstar Sensors products that are sold into the China
market have the required marking on the product designating that the product meets the China RoHS
requirements.
The second step involving a testing obligation is currently under development. Full compliance will follow
once it has been finalized.