MBT Lighting LEDBRITEPACK - Manual (Page 5)

- 4 -
2. “X Ch” will now be displayed, “X” represents the displayed DMX channel mode. Press the UP or DOWN buttons
to find your desired Channel mode.
SLav
- This menu will let you select your desired Master/slave mode
Press the MENU button until “SLav” is displayed, press ENTER.
VER
- This will display the software version
Press the MENU button until “VER” is displayed. Press the ENTER button and the software vesion will be
displayed.
On-footcontroller System Menu
The LEDBRITEPACK comes with an easy to navigate system menu for footcontroller. This next
section will detail the functions of each command in the system menu. Please read the next section
thoroughly!
To access the auto mode press the “AUTO” button. Press the “SOUND” button set your function for
sound mode . Press the COLOR button set your function for color mode .Press the BLACKOUT
button the LED is all dark, and then press it more , the fixture will run ;
BUTTON FUNCTION
AUTO Press it to auto mode,then press to change auto mode
SOUND Press it to sound mode,then press to change sound mode
COLOR Press it to color mode,then press to change color mode
BLACKOUT Press it all LED dark,then press to restore the current state