MBT Lighting LEDROBOSPOT - Manual (Page 2)

Features
Voltage/Frequency: 120/230V,50Hz/60Hz
Power Consumption: 50W
LED:162PCS 5mm intensive brightness LED(56pcs RED, 52pcs
GREEN,54pcs BLUE)
Control：Auto、Sound Active, DMX, Master/Slave
4 DMX channels
Pan 270º, Tilt 360º
Strobe speed 0-255 adjustable
RGB color mixation
Working environment：Indoor use
FUNCTION MODEL SETTING:
This unit applies to Switch-address code, which is the choice of the
mode of the performing control and the address-code, the 10th
address-code is the switch of the transferring of the DMX-512 signal
control, music control and automatic control. The mode set, details as
following:
Mode Binary code（ON）
1 DMX-512signal control mode 1-9 setting address, 10--on
2 Music activation 9--ON、1,2,3,4,5,6,7,8,10--OFF
3 Automatic 1—10--OFF
4 Music control for master unit 9 __ON, 10—OFF, 1-8 for
adjusting flash frequency
5 Automatic for master unit 9, 10 OFF, the rest for changing
colors
6 Slave mode 1-9—NO SETTING, 10—ON
(Don’t connect to controller)
DMX-512 Function:
The device adopts international standard DMX-512 signal, with totally 4
channels, details as below:
DMX-512 address code set:
This unit is equipped with 4 channels, while the address code of the first
light is 0, the second is 0+1=1, the third 1+1=2, and so on.
Detailed DMX-512 address code set as following:
Channel DMX-512 Value Controlled effect
CH1 0-255 Vertical movement (270º)
CH2 0-255 Horizontal movement(360
degree)
0-36 Dark
37-71 Blue
72-107 Green
108-142 Red
143-179 Blue and green
180-215 Red and blue
216-251 Breen and red
CH3
252-255 Blue, red and green
CH4 0-255 Speed of strobe ( quick get
to slow gradually)
Lighting NO. Original address （ ID
Value） Binary Code Dialing（ON）
1 0 10
2 1 10.5
3 2 10.6
4 3 10.5.6
5 4 10.7
6 5 10.5.7
7 6 10.6.7
8 7 10.5.6.7
9 8 10.8
10 9 10.5.8
··· ······ ······