Metal Sales Residential - Manual (Page 33)

© Metal Sales Manufacturing Corporation / Subject to change without notice 3/14
32
RESIDENTIAL PRODUCT GUIDE Image II Residential Valley
u
Part Description Product No. Length Installation Information
1
Residential
W-Valley
50136XX
26 Gauge
10'-2"
 Always install W-Valley
Flashing working from eave up
slope.
2
Offset
Cleat
5506499
26 Gauge
10'-2"
 Install Offset Cleat in a straight
line from eave to high end of the
valley, 6" from the center of the
valley on each side.
3
Pancake Head
Wood Screw
8243100 1"
 4 per 10' of length, to secure
flashing in place.
4
Pancake Head
Wood Screw
8243100 1"
 6" on center. Fasten through
Double Bead Tape Sealant.
5
Double Bead
Tape Sealant
6403899 25'
 Continuous Double Bead
Tape Sealant between
Offset Cleat and Valley.
6
Tube
Sealant
6403200
64032XX
 Apply 2 continuous vertical
beads of Tube Sealant to the
male leg of the panel and along
the top of the rib.
7
Tube
Sealant
6403200
64032XX
 Apply continuous bead of
Tube Sealant to the open hem
of the panel.
C
x
z
C
{
Bend the flat pan of panel
around to accept offset cleat
6"
v
w
y
Tube Sealant on top of the
male rib 6" up from eave