Metal Sales Residential - Manual (Page 36)

© Metal Sales Manufacturing Corporation / Subject to change without notice 6/14
35
RESIDENTIAL DESIGN GUIDE Rakewall w/ Counter & Receiver
Detail for Installation of Siding Prior to Panels
Description Installation Information
1
Residential Counter
Flashing Receiver
 Install bottom edge of flashing 5-1/2" up
from the substrate.
2
Fastener
by Others
 Fasten as shown
3
Pop
Rivet
 Fasten Receiver to the Counter Flashing
12" o.c.
4
Residential Counter
Flashing Flat
 Slide into open hem of Counter Flashing
Receiver
5
Residential
Rakewall
 Slide Residential Rakewall over the
Image II panel edge.
6
Tube
Sealant
 Apply a continuous bead of
Tube Sealant to the slip pocket.
7
Tube
Sealant
 Apply a continuous bead of
Tube Sealant to the inside corner of the
panel prior to attaching the flashing.

Push flashing down over the panel
turn-up and into the sealant.

Wipe away excess sealant with finger or
plastic caulk smoothing tool.
8
Image II
Panel
 Turn up panel 1-3/8" for Rakewall Slip
Pocket
5-1/2"