Metal Sales Residential - Manual (Page 46)

© Metal Sales Manufacturing Corporation / Subject to change without notice 6/14
45
RESIDENTIAL DESIGN GUIDE Skylight/Chimney Detail cont.
Part Description Product No. Length Installation Information
RIGHT
AND LEFT SIDE
Residential
Rakewall
50129XX
26 Gauge
10'-2"
 Cut the Residential Rakewall
2'-0" longer than the length of
the Skylight or Chimney. Use a
single flashing, no laps.
 Slide Residential Rakewall
over the vertical panel edge.
Tube Sealant
6403200
64032XX
 Apply a continuous bead of
Tube Sealant to the slip pocket
and inside corner of panel
(see rakewall detail).
C
Part Description Product No. Length Installation Information
HIGHSIDE OF SKYLIGHT/CHIMNEY
Flat Sheet
25683XX
26 Gauge
10'-2"
 Flat pan only - Use full sheet
for fabrication of cricket.
 12" plus height up the
Skylight/Chimney.
x
 Dimension from full panel rib
on each side of the
Skylight/Chimney.
Offset Cleat
5506499
26 Gauge
10'-2"
Cut the Offset Cleat 4'-0" longer
than the width of the Skylight or
Chimney.
Pancake Head
Wood Screw
8243100 1"
 1 Pancake Head Wood Screw
every 6" of the Offset Cleat.

Fasten through the Double
Bead Tape Sealant.
Double Bead
Tape Sealant
6403899 25'-0"
 Apply to the panel before
attaching the Offset Cleat.
Tube Sealant
6403200
64032XX
 Apply under flat pan or
cricket and at the corners of the
penetration.
C
4'
10'-2"