MK Diamond MK-101 - Manual (Page 7)

7
MK-101 SaFeTY
Diamond Blades improperly used are dangerous. Comply with American National Standards Insti-
tute Safety Code, B7.1 and, Occupational Safety and Health Act covering Speed, Safety Guards,
Flanges, Mounting Procedures, General Operating Rules, Handling, Storage and General Machine
Conditions
waRNiNG
( (
)
)
on
DO NOT eXPOSe TO RaiN
DO NOT expose to rain or use in damp locations.
ROTaTiNG PaRTS
Keep hands, feet, hair, and clothing away from all moving parts to prevent injury. Never
operate the motor with covers, shrouds, or guards removed.
OVeR SPeeD
NeVeR tamper with the governor components or settings to increase the maximum
speed. Severe personal injury and damage to the engine or equipment can result if
operated at speeds above maximum.
ON
( (
)
) eleCTRiCal SHOCK
NeVeR touch electrical wires or components while the engine is running. Exposed,
frayed or worn electrical wiring and plugs can be sources of electrical shock which could
cause severe injury or burns. Do not touch the plug with wet hands.