MK Diamond MK-5005S - Manual (Page 24)

24
The Foot Peddle may be used to Step Cut, Chop Cut, cut with the Cutting Head Positioned Down,
or with the masonry piece positioned vertically. Using the Foot Peddle frees both of the operator’s
hands for holding the masonry piece. The following example utilizes the Step Cut method.
(H)
Turn the saw off when
work is complete
(D)
Verify proper cooling flow on
both sides of the blade
(A)
Position masonry piece
(Adjust the height of the Cutting
Head as necessary)
(C)
Open the Cooling Flow Con-
trol Valve and adjust flow
(B)
Turn the motor ON
(E)
Lower cutting head with Foot
Pedal 1/4” to 1/2”
(F)
Lower cutting head an ad-
ditional 1/4” to 1/2” with Foot
Pedal for “Pull” Stroke
(G)
Repeat Steps E and F
until cut is complete
cutting using the Foot Pedal
DO NOT FORCE TOOL, it will do the job better and safer at the rate for which
it was designed.
caUTIoN
MK-5005S oPERaTIoN