MTS Series 658 Environmental Chamber - Manual (Page 15)

Series 658 Environmental Chamber Introduction 15
Series 658 Environmental Chamber Specifications
Model 658.07 Specifications
Parameter Specification
Internal dimensions Width—177 mm (7 in.)
Depth—125 mm (5 in.)
Height—254 mm (10 in.)
Fluid temperatures Ambient to 65° C (150° F)
(No active cooling.)
*
* Maximum temperature not recommended for protein-based fluids.
Heating Method Circulating fluid from the heating circulator
bath through the chamber.
Temperature accuracy +/-1°C
Materials Chamber and stand—Acrylic
Spray system—PVC tubing and nozzles
Grips and push rods—Stainless steel or
titanium
Power requirements for
both heating systems
and spray system Refer to the vendor manual.
Spray system flow
capacity Refer to the vendor manual.
Model 658.25 Specifications
Parameter Specification
Chamber dimension Inside diameter—250 mm (10 in.)
Height — 450 mm (18 in.)
Fluid temperatures Ambient to 65° C (150° F)
(No active cooling.)
*
Heating method Circulating fluid from the heating circulator
bath through coiled tubing within the chamber.
Temperature accuracy +/-1°C
Materials Chamber and stand—Acrylic
Spray system—PVC tubing and nozzle
Optional grips and push rods—stainless steel
or titanium