Connecting hoses to the model 658.07 – MTS Series 658 Environmental Chamber User Manual
Page 20
Series 658 Environmental Chamber
20
Installation
Installing the Model 658.07 Chamber in the Load Unit
Installation of the 658.07 Environmental Chamber into the load unit is simple.
Insert the chamber’s mounting adapter into the lower pull rod, align the holes,
and insert the mounting pin.
Connecting Hoses to the Model 658.07
Hose connections to the Model 658.07 Chamber are made by quick-disconnects
at the fluid in and fluid out fittings shown in the previous illustration.
Connections at the heating circulator bath are made by pushing the tubing onto
the fittings and securing with hose clamps (the same as the connections for the
Model 685.25 Chamber shown previously).
Quick-
disconnect for
fluid out
Hose connection
for fluid in
Fluid return and
level adjustment
Spray
nozzle
Chamber cover
(split - 2 halves)
Mounting pin
Chamber
Pull rod
Mounting adapter