Operation, Operation 21 – MTS Series 658 Environmental Chamber User Manual
Page 21
Series 658 Environmental Chamber
Operation
21
Operation
Heating circulator
bath operation
A manual describing operation of the NESLAB EX-10 Digital One Heating
Circulator Bath is provided by the vendor. Information is also available at the
vendors website:
Model 658.25
operation
Other than changing the hose connections between the spray bath and heating
coil, all operation is performed using the NESLAB EX-10 Digital One Heating
Circulator Bath.
Refer to the installation section for information on the hose connections; see
“Connecting Hoses to the 658.25.”
Model 658.07
operation
Operation of the Model 685.07 consists of positioning the fluid return and level
adjustment.
1. Loosen the nut on the elbow coupling.
2. Position the fluid return and level adjustment for the test to be performed.
3. Tighten the nut on the elbow coupling.
Fluid return and level
adjustment. Typical
position for spray
applications.
Elbow coupling
Nut
Fluid return and level
adjustment. Typical
position for bath
applications.
Fluid level