MTS 318 Load Unit - Manual (Page 49)

318 Load Unit Installation 49
Airmounts can be overinflated and then explode.
You can be seriously hurt if an airmount explodes, sending fragments flying.
Do not overinflate the airmounts.
318 Load Unit: Unpack Horizontal Configuration
Prerequisites
The load unit is shipped horizontally on a wooden pallet. You will need the
following equipment to unpack the load unit:
• Lifting slings—not chains—to lift the load unit from its pallet
• Rubber mats for the load unit’s feet to rest on
• Wooden blocks for the load unit’s columns to rest on
• A knife to cut the packing straps
WARNING