MTS Multipurpose Express - Manual (Page 16)

Description Panel Callout
Start/stop test procedure button and display of test
procedure status. Test Run 5
List of resource validation and other errors. Error List 6
List of application and test run errors. Application/Test Run Logs 7
3.4.0 Typical Test WorkFlow
The following tasks make up a typical test workflow.
1. Prepare the Test Station
a) Starting Station Manager and Loading Station Configuration on page 18.
b) Starting MPX and Applying Hydraulic Power on page 19.
2. Install a Specimen
a) Setting Station Limits in Station Manager Application on page 20.
b) Positioning Actuator and Installing Specimen on page 21.
c) Applying Offsets to the Input Signal—Optional on page 22.
3. Run the Test
a) Selecting a Test on page 23.
b) Correcting Resource Validation Errors on page 24.
c) Creating a New Test Run on page 24.
d) Running the Test on page 24.
16 MTS TestSuite
3.0 Overview