0 diagnostic files, 0 diagnostic files overview, 0 create diagnostic file window – MTS Multipurpose Express User Manual
Page 28: Diagnostic files
![background image](/manuals/568043/28/background.png)
Figure 4: Resource Validation Errors
3. Resolve resource validation errors.
a) Click Import Resources and select Import all unused controller resources.
b) For each resource validation error, use the drop-down list in the Controller Resource column to select
a compatible resource.
4. After all resource validation errors are resolved, click Delete Unused.
4.5.0 Diagnostic Files
4.5.1.0 Diagnostic Files Overview
The MPX application includes a feature to create a diagnostics file that you can send to Technical Support
for analysis. The diagnostic file is useful for troubleshooting and correcting problems. You can include the
following in a diagnostic file:
•
Diagnostic Logs
•
Station configuration
•
Specimens
•
Test Runs
If required, you can configure the content of the diagnostics file in collaboration with Technical Support.
Note:
Contact MTS Technical Support to assist you with transmitting the diagnostics file.
4.5.2.0 Create Diagnostic File Window
To open the Create Diagnostic File window, click Tools > Create Diagnostic File. By default, all test sections
are selected to be included in the diagnostic file. To exclude a test section from the file, deselect it in the list.
The diagnostic file is created with the .tsdiag extension.
28 MTS TestSuite
4.0 Operator Procedures