MTS Multipurpose Express - Manual (Page 27)

4.4.4.0 Resolving Resource Validation Errors
Resource validation errors must be resolved before you can run the test.
Resource validation errors
The resource map saved in the test definition is an inventory of resources the MPX application expects to
find the next time it connects to a controller.
Resource validation errors typically occur when the test resources in the test definition are named differently
than the controller resources in the currently loaded station configuration.
Remap resource validation errors
To resolve resource validation errors, use the drop-down lists in the Resources tab to remap the test resources
to available controller resources.
Remapping resources can match station resources to test resources when the resources exist under a different
name.
Variable validation errors
Variable validation errors occur when the test definition has variable definitions that your station does not
recognize.
Important:
Variable validation errors cannot be resolved using the Multipurpose Express application.
4.4.4.1.0 Remapping Resource Validation Errors
If resource validation errors occur, you must manually map the test resources to controller resources before
you can load and run the test procedure on that controller. Resource validation errors appear in the Error list
on the bottom of the Multipurpose Express screen and as red icons on the Resources tab.
1. Double-click the error in the error list window to open the Resources tab, or select the test name in the
Explorer tab, and click the Resources tab.
2. The Resources tab includes a table that shows the test resources and the controller resources.
Resource validation errors are indicated by red icons that appear next to the controller resource name.
MTS TestSuite 27
4.0 Operator Procedures