MTS SWIFT 50 GLP Sensor - Manual (Page 23)

Specifications
SWIFT 50 GLP Sensors Installation Hardware Overview 23
Specifications
SWIFT 50 GLP Transducer Performance (part 1 of 2)
Parameter Specification
Use
SWIFT 50 GLP S (stainless steel) for
SWIFT 50 GLP T (titanium) for
high fatigue life, durability
low weight, high sensitivity
Maximum usable rpm 2,200
Maximum speed 200 kph (125 mph)
Fits rim size (usable range) 22.5–24.5 inch *
Maximum hub bolt circle diameter
accommodates M22 studs 335 mm (13.189 in)
Input voltage required 10–17 V DC or 18–34 V DC †
Input power required per transducer 30 W maximum (22 W typical)
Output voltage ± full scale calibrated load ±10 V ‡
SAE J267
Rated load capacity §
Bending moment #
Stainless Steel Titanium
64.50 kN (14,500 lbf) 44.48 kN (10,000 lbf)
55.8 kN•m (494,075 lbf•in) 38.5 kN•m (340,740 lbf•in)
Full scale calibrated ranges **
Longitudinal force (Fx) ±220 kN (±49,458 lbf) ±150 kN (±33,721 lbf)
Lateral force range (Fy) ±100 kN (±22,481 lbf) ±60 kN (±13,489 lbf)
Vertical force range (Fz) ±220 kN (±49,458 lbf) ±150 kN (±33,721 lbf)
Overturning moment (Mx) ±50 kN•m (±442,537 lbf•in) ±37 kN•m (±327,478 lbf•in)
Driving/braking moment (My) ±50 kN•m (±442,537 lbf•in) ±40 kN•m (±354,030 lbf•in)
Steering moment (Mz) ±50 kN•m (±442,537 lbf•in) ±37 kN•m (±327,478 lbf•in)
Resolution (analog system) Infinite
Noise level (peak-to-peak 0-500 Hz) 40 N (9.0 lbf) 30 N (6.7 lbf)
Performance accuracy
Nonlinearity 1.0% full scale
Hysteresis 0.75% full scale
Modulation ††
≤5.0% reading
Cross talk ‡‡ 1.5% full scale