Road and track vehicles, Road and track vehicles 29 – MTS SWIFT 50 GLP Sensor User Manual

Page 29

Advertising
background image

Road and Track Vehicles

SWIFT 50 GLP Sensors Installation

Installing the Transducer

29

Road and Track Vehicles

Equipment required

This procedure requires two people. To install the SWIFT 50 GLPS or SWIFT 50
GLPT sensor, you will need the following equipment:

Spindle adapter spacers (see next figure)

Modified rim (see next figure)

Anti-rotate assembly (including customer-supplied mounting arm)

Small set of metric hex-head wrenches

Tube bender for the restraint tube

Tube cutter

Metric socket head drive set (up to 14 mm) with extension

Molykote g-n paste, 2.8 oz. tube (MTS part number 011-010-217)

Nikal based anti-galling compound (MTS part number 011-354-902)

Transducer mounting bolts (per transducer)

For dual rims

16 size M16 X 1.5 mm

8 size M10 X 1.5 mm

4 size M5 X 0.5 mm

lug nuts and shim washers

For front rims

16 size M16 X 1.5 mm

8 size M10 X 1.5 mm

4 size M5 X 0.5 mm

lug nuts and shim washers

For dual rims

Slip ring extension assembly

Four size M12 X 1.75 mm X 30 mm long bolts

Slip ring assembly fasteners

Four size M8 X 1.25 mm X 20 mm long bolts

Torque wrenches, capable of the following ranges:

2.3–23 N•m (20–200 lbf•in)

24–74 N•m (18–55 lbf•ft),

203–815 N•m (150-600 lbf•ft);

108–325 N•m (80–240 lbf •ft)

93 N•m (69 lbf•ft)

Cables (transducer and BNC, plus customer-supplied from transducer
interface to data recorder)

Tie wraps

Data recorder

Power supply–12 V DC or optionally 24 V DC

1

(for example, a truck

battery)

1 If 24 Vdc compatible electronics was ordered at time of purchase.

Advertising