MTS SWIFT 50 GLP Sensor - Manual (Page 49)

Road and Track Vehicles
SWIFT 50 GLP Sensors Installation Installing the Transducer 49
E. Rotate the tire until the inclinometer reads 0.0°, ±0.1°.
F. Push the Bridge Zero button on the front of the TI box. The LED will
turn on for a few seconds, then start blinking rapidly. The Angle Zero
indicator will start blinking slowly.
G. Rotate the tire in either direction until the inclinometer reads 90°,
±0.1°.
S50-20
Mounting Screws
Digital Inclinometer
–in this position
should read 0°, ±0.1°
Level Bracket
Axes
Icon
Digital Inclinometer
–in this position
should read 0°, ±0.1°
S20-21
Angle Zero
Switch and Indicator
Bridge Zero
Switch and Indicator
S50-23
Level Bracket
Rotate
Transducer
+ or –90°
Digital Inclinometer
–in this position
should read 90°, ±0.1°
Digital Inclinometer
–in this position
should read 90°, ±0.1°