Pololu Orangutan USB - Manual (Page 9)

Creating a new AVR Studio project, step 1
2. Select AVR Simulator as the debug platform and then select the appropriate device for your Orangutan
or 3pi. This will either be ATmega48, ATmega168, or ATmega328P depending on which chip your
Orangutan or 3pi has. Click Finish.
Creating a new AVR Studio project, step 2
3. Write your program in BlinkLED.c as seen in the screen shot below and click the Build button on the
toolbar (or press F7), or just download the zipped BlinkLED project archive for your device from the list
above.
Pololu Orangutan USB Programmer User's Guide © 2001–2011 Pololu Corporation
5. Getting Started Using Windows Page 9 of 32