Precision Turbo and Engine NLR AMS-1000 Boost Controller - Manual (Page 11)

11
Setting Launch, Shift, Scramble, and Reduce polarity, Continued...
4 5
Press button to change Polarity Press button to change Polarity
Factory Reset option
The Factory Reset option will return all controller settings to their factory defaults.
Warning— All current settings will be lost if a Factory Reset is done!
Press the OPTION button.
1
Press the NEXT button three times.
5
3
Press the RESET button.
Confirm Factory Reset.
4
Press OK.
Press the BACK button to
exit. Use the BACK button to
Return to the Main Screen.
Setting LCD Backlight and Contrast
Press the OPTION button.
1
Press the NEXT button three times.
3
Press the LCD button to
go to the LCD options
page.
2
2
Click for Index.
Back Next
NOTE—Target Psi is the amount applied to the waste gate and is NOT the actual Manifold Boost Psi!