Precision Turbo and Engine NLR AMS-1000 Boost Controller - Manual (Page 2)

2
Notice:
It is the responsibility of the purchaser to follow all guidelines and
safety procedures supplied with this product and any other manufactures
product used with the AMS-1000. It is also the responsibility of the pur-
chaser to determine compatibility of the AMS-1000 with the vehicle and
other components.
NLR, LLC assumes no responsibility for damages resulting from ac-
cident, improper installation, misuse, abuse, improper operation, lack of
reasonable care, or all previously stated reasons due to incompatibility
with other manufacturer’s products.
NLR, LLC assumes no responsibility or liability for damages incurred
from the use of products manufactured or sold by NLR, LLC on vehicles
used for competition racing.
NLR, LLC neither recommends nor approves the use of products
manufactured or sold by NLR, LLC on vehicles which may be driven on
public highways or roads, and assumes no responsibility for damages in-
curred from such use.
NLR, LLC does not recommend nor condone the use of its products
for illegal street racing.
Installation of NLR, LLC products signifies that you have read this
document and agree to the terms stated within.
Important Information:
Please see last page for Quick Tech Tips!
Follow all recommended safety guidelines from this and other manu-
factures installation guides.
Static suppression ignition wires must be used with this unit! Mount
the unit as far away from secondary ignition components (coil, ignition
wires, etc.) as physically possible
.
Click for Index.
Back Next
NOTE—Target Psi is the amount applied to the waste gate and is NOT the actual Manifold Boost Psi!