MacDon M100 SP Operators Manual - Manual (Page 13)

SAFETY
169304
11
Rev. C
• Keep all shields in place. Never alter or
remove safety equipment. Make sure
driveline guards can rotate
independently of the shaft and can
telescope freely.
• Use only service and repair parts made
or approved by the equipment
manufacturer. Substituted parts may not
meet strength, design, or safety
requirements.
• Do not modify the machine. Unauthorized
modifications may impair the function
and/or safety and affect machine life.
• Stop engine and remove key from
ignition before leaving operator's seat for
any reason. A child or even a pet could
engage an
idling
machine.
• Keep the area
used for
servicing
machinery
clean and
dry. Wet or
oily floors are
slippery. Wet
spots can be
dangerous when working with electrical
equipment. Be sure all electrical outlets
and tools are properly grounded.
• Use adequate light for the job at hand.
• Keep machinery clean. Straw and chaff
on a hot engine are a fire hazard. Do not
allow oil or grease to accumulate on
service platforms, ladders or controls.
Clean machines before storage.
• Never use gasoline, naphtha or any
volatile material for cleaning purposes.
These materials may be toxic and/or
flammable.
• When storing machinery, cover sharp or
extending components to prevent injury
from accidental contact.