MacDon 922 - Manual (Page 68)

Form # 46620 Issue 01/06 66
ATTACHMENTS
Consult your Windrower Dealer for details on the
following Options and Attachments.
Tall Crop Kit
WholeGoods order number: B2539
Kit includes crop dividers and lean bar extensions.
These can be used separately or together.
Crop dividers mount to lean bar for clean crop
dividing and reel entry in tall crops. Left and right
dividers are included in the kit.
The amount of crop "gathered" by the divider is
adjustable. For the most aggressive gathering,
mount the divider at the two forward holes (A) and
position the U-bolt (B) farther inboard on the lean
bar.
For the least aggressive gathering, mount the
divider at the two rearward holes (C) and position
the U-bolt (B) farther outboard on the lean bar.
Use minor adjustments of U-bolt position to
achieve best results in specific conditions.
Crop dividers should be removed for flat-bed
transport or for storage.
For very tall crops, lean bar extensions allow
raising the lean bar to strike the upper portion of
the crop, leaning it away from the header and
exposing the stalks to the sickle.
Gauge Rollers (Optional to Skid Shoes)
Wholegoods order number: B2882
For stony conditions, gauge rollers allow higher
cutterbar settings than skid shoes. This allows the
operator to lower the header to the ground and let
the gauge rollers follow ground contours. See
"Cutting Height" in Operation section for
adjustment of gauge rollers.
NOTE: The gauge roller kit includes special
narrow outer skid shoes for use with gauge rollers.
Standard width outer skid shoes (shown below)
can not be used with gauge rollers.
Adjustable Skid Shoes (Optional to Rollers)
Wholegoods order number: B2865
Where higher cutting height settings are not
necessary, adjustable outer skid shoes perform
the same function as gauge rollers, following
ground contours to provide consistent cutting
height. See "Cutting Height" in Operation section
for adjustment of skid shoes.
ADJUSTABLE SKID SHOES
GAUGE ROLLERS
CROP DIVIDERS
A
B
MOST AGGRESSIVE
B
C LEAST AGGRESSIVE
LEAN BAR EXTENSIONS