MacDon 922 - Manual (Page 84)

Auger Header
Pre-Delivery Checklist
Perform these checks and adjustments prior to delivery to your customer. See the Operator's Manual for
adjustment details.
CAUTION: Carefully follow the instructions given. Be alert for safety related messages which
bring your attention to hazards and unsafe practices.
HEADER: Serial Number _____________________________
‰ Check for shipping damage or missing parts. Be sure all shipping dunnage is removed.
‰ Check tension of sickle drive belt(s) and auger drive belt. (P. 49 & 55)
‰ Check header flotation. (75 – 85 lbs. [335 – 380 N]) (P. 27 & Tractor or Adapter Operator’s Manual)
‰ Check that header is level. (Tractor Operator’s Manual)
‰ Grease all bearings and driveline(s). (P. 40)
‰ Reposition wobble box breather(s). (P 69).
‰ Check wobble box(es) lube level. (P. 50)
‰ Check skid shoes / gauge wheels are evenly adjusted at a setting appropriate for first crop. (P. 26)
‰ Check lean bar is adjusted at a setting appropriate for first crop. (P. 22)
‰ Check hydraulic hose and wiring harness routing, ensuring adequate clearance with header up or down.
‰ Run machine for 15 minutes, STOP ENGINE and check drives for belt/idler alignment and heated
bearings. Check sickle sections for discolouration caused by misalignment of components.
‰ Check lights are functional.
HAY CONDITIONER: Serial Number _____________________________
‰ Grease all bearings (P. 40)
‰ Check conditioner gear case lube level. (P. 58)
‰ Install breather in gear case. (P. 73)
‰ Align conditioner drive pulley on header drive shaft and check conditioner drive belt tension. (P. 72 & 57)
‰ Adjust forming shields to position suitable for conditions. (P. 31)
‰ Check roll intermesh hardware is securely tightened. (P. 29)
Date Checked: ___________________________ Checked
by: _____________________________