Retsch PM 200 - Manual (Page 27)


Retsch GmbH
27
Operation via the PM100/200 display unit
The mills offer new, very user-
friendly operating functions. All
relevant data can be entered or
called up from a graphic display
operated with a single button.
The menu is multi-lingual.
D E
A
B
C
Designation Function
A Display Displays the menu, the parameter settings, operating information and error
messages.
B START key Starts the grinding process
C STOP key Stops the grinding process
D Key Opens the grinding chamber hood
E Setting button All menu items can be selected and parameters adjusted by turning and
pressing this button.
Turn 1
The different menu items can be selected by turning.
Selected menu items are shown inversely.
Turn 2
Adjust parameters in opened menu items (see Press 1)
Press 1
Selected menu items are opened
Press 2
A short press confirms the adjustment of the parameters
Press 3
Return to the 1
st level menu by continuously pressing the button.
Symbols in the display unit
 Reverse rotation switched on
 Program mode – Store parameters
 Program mode – Edit program
 Program mode – Delete program
 Opening mechanism off
 Alarm off
 Motor or frequency converter too hot °C

°C