Retsch PM 200 - Manual (Page 29)


Retsch GmbH
29
Adjustment options via the display menu
Please consult the menu structure on this page for the setting options on the display explained below. The
selection bar in the display is operated as follows:
 Move vertically through the structure by turning the setting button
 Move horizontally through the menu structure by pressing the setting button
 Adjust numeric values / options by turning the setting button
 Confirm settings by pressing the setting button
 Return to the previous level of the menu structure with "BACK"
 Return to the start screen by prolonged pressing of the setting button
Languages
Menu Display Languages
This allows you to select your language. After making the selection and pressing the setting button the
complete menu structure will be displayed in your language.
Incorrect language selection
If the wrong language has been selected, switch the device off at the main switch.
Hold down the keys simultaneously and switch the device back on.
Once the correct language has been selected, switch the device off and immediately back on again.
Confirm your selection by pressing the setting button.
The device is now permanently set to your language and you should see the main menu
Manual mode
If this function is set, all parameters and functions can be called up and changed at
any time. This is also possible during comminution.
Grinding
program 01
 In order to access the "Grinding program" function, press the setting button
whilst in "Manual mode". The display flashes showing grinding program 1. Any
data already stored in grinding program 1 are also displayed.
 Turn the setting button to the right to select the further grinding programs 2-
10, any parameters stored in these are likewise displayed.
 The machine can be started directly with the selected grinding program.
 Return to "Manual mode“ by turning the setting button fully to the left and
confirm with the setting button.
Grinding time
00:00:01 to 99:59:59
Hours:Minutes:Seconds
The PM100/200 is started at the pre-selected grinding time and a speed of 100 rpm.
Reverse rotation with interval break is not switched on
Speed 100 to 650 rpm
The PM100/200 is started at the pre-selected grinding time and speed.
Reverse rotation with interval break is not switched on