Retsch PM 200 - Manual (Page 34)


Retsch GmbH
34
Error messages on the display
F01 to F12
F02
The display shows
F01
Lock indicator
Close cover
The error appears when the cover
has not been fully closed, or if the
trannion magnets have not been
recognised.
 Close the cover

The display shows The display shows
F03 F04
Problem in the Close or open cover,
safety circuit of should problem remain
the interlock then interlock faulty
Service required! Service required!
The error appears when the
interlock is defective.
 Turn the device off at the
main switch, there is a
safety problem.
The error appears when the
interlock is defective.
 Turn the device off at the
main switch, there is a
safety problem.
F05 F06
The display shows The display shows
F07 F08
Faulty motor Please select
control grinding time
Service required!
The display shows The display shows
F09 F10
Cooling fan is off Sun wheel does
not rotate
Service required! Service required!
F12
The display shows
F11
Sun wheel rotate
to slow
Service required!