Retsch PM GrindControl - Manual (Page 19)

Software
19
5.5.1 Menu File - Measurement task, new
Use this command to create a new empty measurement task and at the same time
end the current measurement task.
Using standard Windows functions, create a new folder for each new measurement
task. This folder may only be stored on the local computer system and not in the
network .
When creating a new measurement task, a new folder is created automatically for
the measurement data and a measurement file (.afg). This file contains information
on the measurement task, the measurement systems involved and a list of the
measurements carried out.
For each new measurement, the software generates a new folder in the
measurement task folder. This folder has the name of the current measurement
and is numbered consecutively by the software. It contains the data record of the
participating measurement systems. Once a file exceeds a certain size, it is
divided.
Alternatively, you can also use the following button.
Fig. 12: Button Measurement task, new
5.5.1.1 Steps for Creating a New Measurement Task
0. Once you click on the symbol or the command, the “Configure measurement
task” window appears. Assign a new name to the first measurement task
and save the file to a local drive (e.g. C:\).
The measurement tasks must be saved to a local drive.
The Configure Measuring Systems program window appears. If you wish to add a
new measuring system, follow steps 1. to 6.
1.
Enter your grinding jar’s MAC address number sequence into the MAC
address field in the Configure Measuring Systems program window.
Fig. 13: Enter into the MAC address field
You will find the MAC address on the cover page of your operating manual:
Fig. 14: MAC Address