Retsch PM GrindControl - Manual (Page 36)

Telegesis (ZigBee) USB stick
36
• Before removing the grinding bowl, make sure that the clamping ring is
sitting securely.
• Only remove the grinding bowl with the closing device. Before opening it, let
it cool down and make sure it is in a safe position (suction equipment).•
Pos : 9.1 /00020 BD A Software/20005 PM GC Kapitelsamml ung/Ü berschriften/1. Ü berschriften/1 U SB Stic k T eleg esis (ZigBee) @ 0\mod_1209389458882_9.doc @ 705 @ @ 1
7 Telegesis (ZigBee) USB stick
Pos : 9.2 /00020 BD A Software/20005 PM GC Kapitelsamml ung/Warnhinweis e/M odul War nhinweis Zi ehen Sie den USB Stic k Tel egesis (ZigBee) nic ht aus dem USB-Port @ 0\mod_1218448752202_9.doc @ 2200 @ @ 1
Do not pull the Telegesis (ZigBee) USB Stick out of the USB port as long as
the PM GrindControl software is active.
Pos : 9.3 /00020 BD A Software/20005 PM GC Kapitelsamml ung/Ü berschriften/1.1 Ü bersc hriften/11 Sys tem- Vorrauss etzungen @ 0\mod_1209389491118_9.doc @ 711 @ @ 1
7.1 System Requirements
Pos : 9.4 /00020 BD A Software/20005 PM GC Kapitelsamml ung/U SB Stic k T eleg esis (ZigBee)/M odul U SB Stic k tec hnische Vorraussetzungen @ 0\mod_1214465966515_9.doc @ 1820 @ @ 1
Your PC must meet the following technical requirements to allow the use of the
Telegesis (ZigBee) USB stick:
– Windows XP or Windows Vista
– USB 2.0 (1.1)
Pos : 9.5 /00020 BD A Software/20005 PM GC Kapitelsamml ung/Ü berschriften/1.1 Ü bersc hriften/11 Tec hnisc he D aten @ 0\mod_1213703629615_9.doc @ 1660 @ @ 1
7.2 Technical Data
Pos : 9.6 /00020 BD A Software/20005 PM GC Kapitelsamml ung/U SB Stic k T eleg esis (ZigBee)/M odul Zig bee tec hnische D aten @ 0 \mod_1210152050859_9.doc @ 900 @ @ 1
Frequency band: 2.4GHz ISM band
Transmission rate: 250kbit/s over the air data rate – NB: actual usable data
throughput with ZigBee® is about 20kbps
Transmission power: Typically 17dBm (50mW) output power
Damping: High sensitivity of -97dBm Typ (at 1% packet error rate)
Pos : 10 /00010 Bedi enungsanleitungen Kapitels ammlungen/------- Seitenumbruc h ----------- @ 0\mod_1222344373758_0.doc @ 2386 @ @ 1