Retsch RS 200 - Manual (Page 25)

15.11.2006

Retsch GmbH
25
Doc. Nr. D 98.725.9998
Fault signals in the display
F02 to F13
Appearing in display Appearing in display
F03 F04
Problem in Open or close lid,
safety circuit of otherwise lid lock
lid lock defective
Service necessary! Service necessary!
Fault appears with the lid closed if
the lid lock is defective.
 Switch off machine at the
main switch and switch on
again.
If the fault reappears this is a
safety problem and servicing is
necessary.
Fault appears with the lid closed if
the lid lock is defective.
 Switch off machine at the
main switch and switch
on again.
If the fault reappears this is a
safety problem and servicing is
necessary.
Appearing in display Appearing in display
F07 F15
Motor speed control Problem in
is defective safety circuit of
frequency converter
Service necessary!
Appearing in display Appearing in display
F16 F17
Motor is overheated Motor is overheated
No START possible Has been switched off
Please allow to cool
Please allow to cool
Continue with STOP
Appearing in display
F18
Problem in
safety circuit of
transformer
Service necessary!