Retsch AS 200 jet - Manual (Page 24)

Operating the machine
24
Pos : 9. 21 /0025 War nhi nweis e/ V0049 VORSICHT H erausgeworf enen G egenst ände ( AS200J et) @ 3\ mod_1282734264369_9.doc x @ 22789 @ @ 1
CAUTION
Objects thrown-out or falling down
Connection of compressed air instead of vacuum cleaner
–
If compressed air is connected to one of the two air openings, the sieve lid
and the sieve will be hurled out.
• This device may not be operated with compressed air.
Pos : 9. 22 /0005 RET SCH Bedi enungs anleit ung en Kapitels ammlungen/ AS200J et /0007 AS200Jet Bedienung/ AS200J et Modul Ansc hlus s I ndus trie St aubs aug er @ 1\mod_1239966838301_9. doc x @ 8167 @ 3 @ 1
The AS200jet can be operated only with a suction extractor, such as for example a
vacuum cleaner. We recommend the use of the Retsch industrial vacuum cleaner,
which is available as an accessory.
CAUTION
Before starting to use the Retsch industrial vacuum cleaner, read the
accompanying operating manual.
Fig. 10: Connection of the Retsch industrial vacuum cleaner
• As required, connect the manual suction force adjuster to the
air outlet channel (H).
• Connect your vacuum cleaner’s suction tube to the air outlet
channel (H) or to the manual suction force adjuster.
• Insert the type F IEC C14 connector on the vacuum cleaner
into the IEC C13 panel-mounted outlet (P).
The power for the Retsch industrial vacuum cleaner is supplied from the AS200jet.
5.8.1 Vacuum cleaner function
By means of the vacuum cleaner menu item, the industrial vacuum cleaner
connected to the IEC C13 panel-mounted outlet (P) can be used for cleaning the
device too.
• Pull the industrial vacuum cleaner’s suction hose out of the air outlet channel
(H).
• Navigate to the menu item Manual suction apparatus.
• Press the start button.
H
P