Retsch AS 200 jet - Manual (Page 35)

Operating the machine
35
5.16.4 Date
The current date can be entered here.
The device can be disconnected from the mains for up to 30 days without losing
the settings.
5.16.5 Time
The time can be entered here.
The time then appears in the stand-by screen.
The device can be disconnected from the mains for up to 30 days without losing
the settings.
5.16.6 Signal tone
The error messages on incorrect operation can be supported by an acoustic signal
tone. When the function is switched off, the corresponding pictogram appears
Signal tone on
Signal tone off
5.16.7 Interface
Fig. 5: Interfaces
In this menu you can switch from using the RS232 (K) or the USB (L) interface.
RS232 interface active
USB interface active
5.16.8 Service
5.16.8.1 Operating hours
The hours counted are sieving hours, i.e. the total times between START and
STOP. The times cannot be manipulated.
5.16.8.2 Software version display
Shows the software version of the display.
5.16.8.3 Software version controller
Shows the software version of the controller.
5.16.8.4 Update software
5.16.8.4.1 Display
– The target display unit is selected on the PC via a software update selection
menu.
K
L