Retsch AS 200 jet - Manual (Page 40)

Operating the machine
40
Fig. 18: Steps 3 and 4
3. Screw the screw (Z4) in.
4. Push the manual suction power adjuster (Z5 ) into the air outlet‘ (H).
Fig. 19: Steps 5 and 7
5. Push the cyclone with cover into the manual suction power adjuster.
Position the cyclone with cover such that the support on the cyclone fits into
the housing support (Z3).
6. Screw the knurled head screw (Z1) into the housing support.
Z4 Z5
H
Z1