Retsch PT 200 - Manual (Page 11)

Technical data
11
Fig. 1: Type plate lettering
1 Device designation
2 Year of production
3 Part number
4 Serial number
5 Manufacturer’s address
6 CE marking
7 Disposal label
8 Bar code
9 Power version
10 Mains frequency
11 Capacity
12 Amperage
13 Number of fuses
14 Fuse type and fuse strength
In the case of questions please provide the device designation (1) or the part
number (3) and the serial number (4) of the device.
Pos : 4.15 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 El ektrisc her Ansc hlus s @ 0\mod_1226565067445_9.doc @ 3500 @ 2 @ 1
3.7 Electrical connection
Pos : 4.16 /00003 Standard Kapitel/General M odul Elektrischer Ans chl uss @ 0\mod_1228918538521_9.doc @ 4731 @ @ 1
WARNING
When connecting the power cable to the mains supply, use an external fusethat
complies with the regulations applicable to the place of installation .
• Please check the type plate for details on the necessary voltage and
frequency for the device.
• Make sure the levels agree with the existing mains power supply.
• Use the supplied connection cable to connect the device to the mains power
supply.
Pos : 5.1 /00005 Übersc hriften/1. Übersc hriften/1 Tec hnisc he Daten @ 0 \mod_1222344525522_9.doc @ 2407 @ @ 1
4 Technical data
Pos : 5.2 /00004 War nhi nweis e/V0005 VORSICHT explosi onsg efärdete Atmosphär e @ 1\mod_1239868668923_9.doc @ 8140 @ @ 1
1
2
3
4
5
6
7 8
9 10
11 12 14 13