Retsch PT 200 - Manual (Page 23)

Operating the machine
23
Fig 12: Assembly of the vibratory feeder
For sample division of larger volumes and as a condition for higher division
accuracy, it is generally advisable to evenly feed in the sample material using a
vibratory feeder. The Retsch vibratory feeder DR100 is a suitable accessory for this
purpose.
• Position the vibratory feeder on the device.
A device socket is located on the back of the device.
Fig. 13: Back of the device and interface
• Insert the mains cable of the DR100 into device socket on the back of the
device (DS).
Pos : 6.29 /00005 Ü berschriften/1.1 Ü bersc hriften/1.1 Übersc hriften BD A/11 Sc hnitts tell enverbi ndung herstellen @ 3\mod_1303201613915_9.doc @ 25210 @ 2 @ 1
5.12 Creating interface connection
Pos : 6.30 /00010 Bedi enungsanleitung en Kapitels ammlungen/PT200 (2011)/0015 PT 200 Bedienung/1546 PT200 M odul Schnittstelle ansc hließ en @ 3\mod_1303283321822_9.doc @ 25240 @ @ 1
Before setting up the DR100, read the DR100 operating manual.
DS